Printer Guide for imageCLASS 2300N

Connecting to a Computer
1-9
Before You Start Using This Machine
1
Connecting through a Parallel Interface
This machine can connect to a computer through a parallel interface. After
connection, install the supplied printer driver and utility software to match the OS of
your computer.
For installing the printer driver and utility software, see "Installing the Software," on
p. 1-13.
Connecting to a DOS/Windows computer
The printer port of an IBM PC/AT and other DOS/Windows compatible computers is
normally a parallel port (IEEE-1284 compliant). Connect the parallel port of this
machine to the printer port of the computer using an interface cable to match your
computer.
IMPORTANT
If you have connected a computer to the parallel port of this machine, some utility
software cannot be used. For details, contact your service representative.
Printer driver software
Printer cable
Parallel port Printer port
Connect a 36-pin Centronics connector.
Be sure to secure the clips on both sides.
*
*