Network Guide for imageCLASS 2300N

Setting Up a Computer for Printing
2-30
Using a TCP/IP Network (Windows/UNIX)
2
4 Open the [Printer Properties] dialog box.
❑ On the [Start] menu, point to [Settings] ➞ click [Printers].
❑ Right click the printer icon you want to use for printing.
❑ On the pop-up menu, click [Properties].
5 Set up the printing destination.
❑ Click the [Ports] tab to display the [Ports] sheet.
❑ Click [Add Port] to open the [Printer Port] dialog box.
❑ From [Available Printer Ports], select [LPR Port] ➞ click [New Port].
The [Add LPR compatible printer] dialog box opens.
❑ Enter the IP address or printer host name in [Name or address of server
providing LPD].
❑ Enter "LP" in [Name of printer or print queue on that server] ➞ click [OK].
NOTE
You can specify a print queue in [Name of printer or print queue on that server].
The following three print queues are available (be sure to use only capital letters to
enter a print queue):
- LP: The machine prints according to its spool settings. Normally enter "LP" as a
print queue.
- SPOOL: The machine prints only after spooling a print job on the hard disk
regardless of its spool settings.
- DIRECT: The machine prints without spooling a print job on the hard disk
regardless of its spool settings.