Network Guide for imageCLASS 2300N

Setting Up a Computer for Printing
2-29
Using a TCP/IP Network (Windows/UNIX)
2
Windows NT 4.0
1 Check that [Microsoft Windows TCP/IP Printing] is installed.
❑ Right click the [Network Neighborhood] icon on the screen ➞ click [Properties].
❑ Click the [Services] tab to display the [Services] sheet.
If [Microsoft TCP/IP Printing] is not included in [Network Services], proceed to
step 2; otherwise skip to step 3.
2 If [Microsoft TCP/IP Printing] is not installed, install it.
❑ Click [Add].
❑ Select [Microsoft TCP/IP Printing] from [Network Services] ➞ click [OK].
❑ When asked to insert the Windows NT setup disk, insert the disk, and then
continue.
After the files have been copied, the [Network] dialog box opens.
❑ Click [OK].
❑ Click [Restart] to restart Windows NT.
3 Install the printer driver. (See Chapter 1, "Before You Start
Using This Machine," in the PCL Driver Guide.)
When the dialog box for selecting the printer management appears, select [My
Computer]. Do not select [Network printer server].
The port selection can be changed after installation. You can select any port,
such as [LPT1].