Network Guide for imageCLASS 2300N

Setting Up a Computer for Printing
2-27
Using a TCP/IP Network (Windows/UNIX)
2
3 Set up the printing destination.
❑ Click the [Ports] tab to display the [Ports] sheet.
❑ Click [Add Port] to open the [Printer Ports] dialog box.
❑ From [Available Ports], select [Standard TCP/IP Port] ➞ click [New Port].
The [Add Standard TCP/IP Printer Port Wizard] starts.
❑ Click [Next].
❑ In [Printer Name] or [IP Address], enter the printer IP address or printer host
name ➞ click [Next].
After the computer has confirmed that there is a printer at the IP address you
entered, the [Completing the Add Standard TCP/IP Printer Port Wizard] window
appears.
If the dialog box displays <Additional Port Information Required>, follow the
instructions on the screen to search again, or select [Standard-Canon Network
Printing Device with P9100] from [Device type] ➞ click [Next] to exit the Wizard.
❑ Click [Finish].
❑ Click [Close] to close the [Printer Ports] dialog box.