Network Guide for imageCLASS 2300N

Preparation for Protocol Settings

2-5

Using a TCP/IP Network (Windows/UNIX)

Press [F3] (▼) or [F4] (▲) to highlight <01 AUTO> or <02

FIXED>.

● If you have selected <01 AUTO>:

❑

Press [OK].

The AUTO menu appears.

❑ Press [F3] (▼) or [F4] (▲) to select <01 DHCP>, <02 BOOTP>, or <03 RARP>

➞ press [OK].

The DHCP, BOOTP, or RARP menu appears.

❑ Press [F3] (▼) or [F4] (▲) to select <01 ON> or <02 OFF> ➞ press [OK].

The AUTO or NETWORK SETTINGS menu returns.

NOTE

Press (BACK) to return to the NETWORK SETTINGS menu from the

AUTO menu.

● If you have selected <02 FIXED>:

❑ Press [OK].

The NETWORK SETTINGS menu returns.

❑ Press [F3] (▼) or [F4] (▲) to select <02 IP ADDRESS>, <03 SUBNET

MASK>, or <04 DEFAULT GATEWAY> ➞ press [OK].

The display for entering the IP address appears.