Network Guide for imageCLASS 2300N

Preparation for Protocol Settings
2-4
Using a TCP/IP Network (Windows/UNIX)
2
1 Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2 Press [F3] (▼) or [F4] (▲) to highlight <06 SYSTEM
SETTINGS> ➞ press [OK].
Each time you press (▼) or (▲), the next or previous menu
option becomes highlighted.
The SYSTEM SETTINGS menu appears.
IMPORTANT
When <ENTER A MANAGEMENT ID NUMBER> is displayed, input the System
Administration ID and the System Password. For how to input the System
Administration ID and the System Password, see Chapter 5, "System Manager
Settings," in the Reference Guide.
3 Press [F3] (▼) or [F4] (▲) to highlight <03 NETWORK
SETTINGS> ➞ press [OK].
The NETWORK SETTINGS menu appears.
4 Make sure that <01 IP ADDRESS AUTO.> is highlighted ➞
press [OK].
The IP ADDRESS AUTO. menu appears.
Additional Functions
F3
F4
OK
F3 F4
F3
F4
OK
OK