Facsimile Guide for imageCLASS 2300N

Setting Up Speed Dialing

2-27

Speed Dialing

Press [F3] (▼) or [F4] (▲) to highlight <07 SYSTEM

SETTINGS> ➞ press [OK].

If a System Administrator ID and password are set, enter them after selecting

<07 SYSTEM SETTINGS> ➞ press [OK].

For information on entering or setting the System Administrator ID and password,

see Chapter 5, "System Manager Settings," in the Reference Guide.

The SYSTEM SETTINGS menu appears.

Press [F3] (▼) or [F4] (▲) to highlight <05 ACCESS CODE> ➞

press [OK].

The ACCESS CODE menu appears.

Press [F3] (▼) or [F4] (▲) to highlight <01 USE> or <02 DO

NOT USE> ➞ press [OK].

If you selected <01 USE>, proceed to step 6.

If you selected <02 DO NOT USE>, the setting is complete.