Facsimile Guide for imageCLASS 2300N

Sequential Broadcasting to More Than One Location
4-13
Additional Sending Features
4
NOTE
Regardless of the order you used when dialing, the machine sends the documents
to the destinations you specified in the following order: one-touch speed dialing
numbers, coded speed dialing numbers, regular dialing numbers, then redialing.
If you have placed your document on the platen glass, enter the fax numbers, scan
all the papers of the document into memory ➞ press (OK).
To cancel Sequential Broadcasting, press (Stop). After the message <CANCEL
DURING TX/RX?> appears, press (YES) to cancel all destinations.
If a number is busy or does not reply, the machine skips it and to send your
documents to the other destinations, and then redials the number that was busy or
did not reply.
The document is automatically deleted from memory when Sequential
Broadcasting is complete.
You can also use Delayed Sending when using Sequential Broadcasting. (See
"Sending Documents at a Preset Time," on p. 4-15.)
Printing the Multi TX Report
Print a Multi TX Report to make sure all your transactions completed successfully
when using Sequential Broadcasting. In order to print the Multi TX Report, you
must assign the PRINT REPORT function to a program one-touch key (See
"Program One-Touch Keys," on p. 10-3.)
NOTE
You need to assign the PRINT REPORT function every time you wish to print the Multi TX
Report because the machine does not retain the setting after the transactions are
completed.
1 Press [FAX].
lights, and the Fax Basic Features screen appears.
2 Place your documents on the machine.
For instructions explaining how to place your documents, see "Placing Originals,"
on p. 3-6.
NOTE
You can adjust the resolution, density, and image quality. (See "Adjusting the
Resolution, Density, and Image Quality," on p. 3-12.)
You can also specify a sender's name with [TTI Selector]. (See "Sending a
Document with a Sender Name," on p. 3-15.)
F3
FAX
FAX