Basic Guide for imageCLASS 2300

Registering the Required Sender Information
5-14
Faxing - Basic Operations
5
● If you selected <01 TTI POSITION>:
❑ Press [OK] ➞ press [F3] (▼) or [F4] (▲) to highlight <01 OUTSIDE IMAGE> or
<02 INSIDE IMAGE> ➞ press [OK].
<01 OUTSIDE IMAGE>: This prints the TX Terminal ID outside the image area
on the output fax.
<02 INSIDE IMAGE>: This prints the TX Terminal ID inside the image area on
the output fax.
The TX TERMINAL ID menu returns.
● If you selected <02 TEL NUMBER MARK>:
❑ Press [OK] ➞ press [F3] (▼) or [F4] (▲) to highlight <01 FAX> or <02 TEL> ➞
press [OK].
<01 FAX>: This prints the letters <FAX> before the telephone number.
<02 TEL>: This prints the letters <TEL> before the telephone number.
The TX TERMINAL ID menu returns.
NOTE
If you selected <02 I-FAX> in step 4, the display for selecting the TTI POSITION
appears. You also cannot select <TEL NUMBER MARK>.
6 Press [Reset] to return to the Basic Features screen.
F3
F4
OK
OK
F3
F4
OK
OK
Reset