User`s guide

Scanning Different Size Originals Together (Different Size Originals)
3-15
Specifying the Scan Settings
3
Scanning Different Size Originals Together
(Different Size Originals)
The Different Size Originals mode enables you to place different size originals into
the feeder and scan them at the same time.
The combinations of the paper sizes available for the Different Size Originals mode
are as follows:
• A4 and A3
• A4R and A5
IMPORTANT
• The combinations other than described above may wrinkle originals.
• The Different Size Originals mode is available only when the machine is equipped with
the feeder (optional for the imageRUNNER 2545/2535/2530/2525/2520).
• Make sure that the different sized originals are of the same weight (paper type).
• If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
• The Different Size Originals mode cannot be used with the following modes:
- Document Size (except for [Auto]) (See “Specifying the Document Size,” on p. 3-6.)
- Stamp (See “Stamping Originals Which Have Already Been Scanned,” on p. 3-23.)
NOTE
• For instructions on how to place your originals, see Chapter 2, “Basic Operations,” in
the Reference Guide.
• For instructions on how to specify the destination, see “Basic Sending Methods,” on
p. 2-2, or Chapter 4, “Specifying Destinations Easily and Quickly.”
2 Press [Scan Settings] ➞ select [Option].
For help, see step 2 in “Specifying the Document Size,” on p. 3-6.
1 Press (SEND) ➞ place your
originals into the feeder ➞
specify the destination.
Align the top and bottom edges of the
originals with the edges of the feeder by
adjusting the slide guides.