User`s guide

Adjusting the Density and Image Quality
3-12
Specifying the Scan Settings
3
6 Press (Start) to start scanning your originals.
To cancel scanning, press [Cancel] or (Stop).
If the original is placed on the platen glass, follow the instructions that appear on the
touch panel display ➞ press (Start) once for each original. When scanning is
complete, press [Done].
The scanned data is sent to the specified destination when scanning is complete.
NOTE
The specified settings return to their defaults after documents are sent. If you want to
keep the settings as the default, see “Registering Frequently Used Scan Settings as
Default (Standard Send Settings),” on p. 7-5.
5 Press [OK].
NOTE
To cancel the specified settings, press
[Cancel] on the Scan Settings screen
or press (Reset).