User`s guide

Advanced Sending Methods
2-49
Sending Documents
2
5 Press (Start) to start scanning your originals.
To cancel scanning, press [Cancel] or (Stop).
If the original is placed on the platen glass, follow the instructions that appear on the
touch panel display ➞ press (Start) once for each original. When scanning is
complete, press [Done].
The scanned data is sent to the specified destination when scanning is complete.
NOTE
• If the settings under <Authentication Method> in <SMTP Authentication Settings> are
configured to display an authentication screen, the Enter Network Password screen
appears when you press (Start) to send e-mails or I-faxes. (See Chapter 4,
“Customizing Settings,” in the Remote UI Guide.) Specify the user name and
password ➞ press [OK].
• If the settings under <When Sending File to Address Registered in Address Book> are
configured to display an authentication screen, the Enter Network Password screen
appears when you press (Start) to send documents to a file server. (See Chapter
4, “Customizing Settings,” in the Remote UI Guide.) Specify the user name and
password ➞ press [OK].
3 Press [Scan Settings] to specify
the scan settings you require.
For more information, see Chapter 3,
“Specifying the Scan Settings.”
4 Press [Send Settings] to specify
the send settings you require ➞
press [Done].
For more information, see “Basic Sending
Methods,” on p. 2-2.