User`s guide

Basic Sending Methods
2-21
Sending Documents
2
1 Press (SEND) ➞ place your originals.
IMPORTANT
You can only send one page at a time when you place your original on the platen
glass. If you want to send a document of two or more pages, place your originals into
the feeder.
NOTE
• For instructions on how to place your originals, see Chapter 2, “Basic Operations,” in
the Reference Guide.
• If <Enter your User Name and password and specify the login destination.> appears,
follow the instructions in “Logging in to Authorized Send,” on p. 2-35.
• If any of the messages below appears, follow the instructions in Chapter 2, “Basic
Operations,” in the Reference Guide:
- <Enter the Department ID and Password using the numeric keys.>
- <You must insert a control card.>
- <Enter the User ID and Password.>
2 Insert the USB memory media
device into the USB port on the
left or right side of the machine.
IMPORTANT
• The USB ports on the right side of
the machine are optional (USB
Application 3-Port Interface Kit-A1).
• The left side USB port is not available
when the above option is attached.
3 Press [Done].
NOTE
The displayed message may vary
depending on the settings in Memory
Media Settings. (See Chapter 4,
“Setting the Send Function,” in the
System Settings Guide.)