User`s guide

Basic Sending Methods

2-12

Sending Documents

Press (SEND) ➞ place your originals.

NOTE

• For instructions on how to place your originals, see Chapter 2, “Basic Operations,” in

the Reference Guide.

• If <Enter your User Name and password and specify the login destination.> appears,

follow the instructions in “Logging in to Authorized Send,” on p. 2-35.

• If any of the messages below appears, follow the instructions in Chapter 2, “Basic

Operations,” in the Reference Guide:

- <Enter the Department ID and Password using the numeric keys.>

- <You must insert a control card.>

- <Enter the User ID and Password.>

The following server protocols are available.

The table below shows the system requirements for the server that is compatible with

IPv4.

Press [New Address] ➞ [File].

NOTE

If File Send is set to ‘Do not allow’ or

‘Only allow sending to own address or

specified folder’, [File] is not displayed.

(See Chapter 4, “Customizing

Settings,” in the Remote UI Guide.)

Press the Protocol drop-down

list ➞ select the desired server

protocol.