User`s guide

Basic Sending Methods
2-8
Sending Documents
2
1 Press (SEND) ➞ place your originals.
NOTE
• For instructions on how to place your originals, see Chapter 2, “Basic Operations,” in
the Reference Guide.
• If <Enter your User Name and password and specify the login destination.> appears,
follow the instructions in “Logging in to Authorized Send,” on p. 2-35.
• If any of the messages below appears, follow the instructions in Chapter 2, “Basic
Operations,” in the Reference Guide:
- <Enter the Department ID and Password using the numeric keys.>
- <You must insert a control card.>
- <Enter the User ID and Password.>
NOTE
For instructions on how to enter characters, see Chapter 2, “Basic Operations,” in the
Reference Guide.
2 Press [New Address] ➞ [I-Fax].
NOTE
If E-mail Send is set to ‘Do not allow’
or ‘Only allow sending to own
address’, [I-Fax] is not displayed. (See
Chapter 4, “Customizing Settings,” in
the Remote UI Guide.)
3 Enter the I-fax address (up to 120
characters) using the on-screen
keyboard.