User`s guide

Printing Communication Reports

8-13

Printing Communication Reports and Lists

<Auto Print>:

<Send/Receive Separate>:

<Daily Activity Report Time>:

NOTE

If Job Log Display in System Settings is set to ‘On’, <Auto Print> automatically

switches to ‘Off’.

Press (Reset) to return to the top screen.

RX Report

Follow this procedure to set RX Reports to print automatically.

NOTE

The default setting is ‘Off’.

Press (Additional Functions) ➞ [Report Settings] ➞ [Settings].

For help, see steps 1 to 3 in “TX Report,” on p. 8-9.

[On]: The Activity Report is automatically printed when the number of

send and receive transactions reaches 40.

[Off]: The Activity Report is not automatically printed.

[On]: The send and receive logs are printed separately.

[Off]: The send and receive logs are not printed separately.

[On]: The Activity Report is printed at the specified time. Enter all four

digits of the time (including zeros), using 24-hour notation. If you

make a mistake when entering the time, press (Clear) to clear

your entry ➞ enter another four digit number.

If the number of send and receive transactions exceeds 40

before the specified time, an Activity Report of most recent 40

transactions is printed.

[Off]: The time to print the Activity Report is not specified.