User`s guide

Transmission Related Items
7-30
Customizing the Machine’s Settings
7
Checking the Dial Tone Before Sending
You can set whether to check for the dial tone before dialing when sending a fax.
NOTE
The default setting is ‘On’.
1 Press (Additional Functions) ➞ [Communications Settings] ➞
[TX Settings] under <Fax Settings>.
For help, see steps 1 to 3 in “Sending with Error Correction Mode (ECM
Transmission),” on p. 7-23.
4 Press (Reset) to return to the top screen.
NOTE
The Check Dial Tone Before Sending mode is enabled only after you restart the
machine (the main power switch is turned OFF, then back ON again).
2 Press [Check Dial Tone Before
Sending].
3 Select [On] or [Off] ➞ press [OK].