User`s guide

Transmission Related Items

7-25

Customizing the Machine’s Settings

Press (Reset) to return to the top screen.

Adjusting the Pause Time

Some overseas dialing may be affected by the distance or complex routing of

connections when dialing the international access code, country code, and the

destination’s telephone number all at once. In such cases, insert a pause after the

international access code. This helps to improve the connection.

NOTE

• You can insert a pause when you dial the fax number using - (numeric keys).

(See “Sending a Fax,” on p. 2-24, and “Calling from an Extension,” on p. 2-50.)

• Pauses entered at the end of dialed fax numbers are always 10 seconds long.

• The default setting is ‘4sec(s)’.

Press (Additional Functions) ➞ [Communications Settings] ➞

[TX Settings] under <Fax Settings>.

For help, see steps 1 to 3 in “Sending with Error Correction Mode (ECM

Transmission),” on p. 7-23.

Select [On] or [Off] ➞ press [OK].

[On]: Uses ECM.

[Off]: Does not use ECM.