User`s guide

LDAP Server
4-62
Specifying Destinations Easily and Quickly
4
Registering in the Address Book
1 Display the Register Address screen ➞ press [Register New Add].
For help, see steps 1 and 2 in “E-Mail Addresses,” on p. 4-3.
3 Follow steps 2 to 4 in “Specifying Addresses via an LDAP Server,”
on p. 4-55 to search destinations.
If you press [Register e-mail address for I-Fax], the selected e-mail address can be
registered as an I-fax destination. To register e-mail addresses as I-fax addresses,
register one e-mail address at a time.
To continue searching, press [Back].
NOTE
• To cancel a selected destination, select the destination again to clear the check mark.
• If both the Send function (optional for the imageRUNNER 2545/2535/2530/2525/2520)
is activated and the optional Super G3 Fax Board-AG1 is attached to the machine, you
can sort and limit the view of the displayed addresses by using the Type drop-down
list.
2 Press [Network Add. Book].
4 Select the desired destination
from the search results.
You can select up to 32 destinations.
If you want to select the first 32
destinations, press [Select All (Max 32)]. (If
a destination is selected, the key changes
to [Clear Selection].)