User`s guide

Specifying the File Format
3-22
Specifying the Scan Settings
3
● If you want to separate multiple images and send them as separate files,
each of which consists of only one page:
5 Press (Start) to start scanning your originals.
To cancel scanning, press [Cancel] or (Stop).
If the original is placed on the platen glass, follow the instructions that appear on the
touch panel display ➞ press (Start) once for each original. When scanning is
complete, press [Done].
The scanned data is sent to the specified destination when scanning is complete.
NOTE
The specified settings return to their defaults after documents are sent. If you want to
keep the settings as the default, see “Registering Frequently Used Scan Settings as
Default (Standard Send Settings),” on p. 7-5.
❑ Press [Divide into Pages].
If you want to send multiple images as a
single file without dividing them, do not
press [Divide into Pages].
IMPORTANT
If you select [JPEG] as the file format
in this step, [Divide into Pages] is
automatically activated.
4 Press [Done].