User`s guide

Specifying Common Settings
3-28
Configuring the Machine’s Basic Settings
3
Setting the Gamma Value for Remote Scans
You can set the gamma value used when scanning color documents into your
computer on the network. Select a gamma value that is most suited to your
computer settings so that your scans can be reproduced on the computer display to
the closest approximation of the original.
NOTE
• For more information on the remote scan function, see the Network ScanGear Guide.
• The default setting is ‘Gamma 1.8’.
1 Press (Additional Functions) ➞ [Common Settings].
For help, see steps 1 and 2 in “Initial Function at Power ON,” on p. 3-2.
4 Press (Reset) to return to the top screen.
2 Press [ ] or [ ] until
[Gamma Value
for Remote Scans] appears ➞
press [Gamma Value
for Remote Scans].
3 Press [Gamma 1.0], [Gamma 1.4],
[Gamma 1.8], or [Gamma 2.2] to
select the desired gamma value
➞ press [OK].
The selected mode is set.