User`s guide

Specifying Common Settings
3-27
Configuring the Machine’s Basic Settings
3
Displaying a Feeder Error Message Prompt
If the feeder is not clean, the machine may scan and print dust and grime on the
output. You can set the machine to prompt you to clean the scanning area when the
machine detects streaks or stains.
IMPORTANT
This mode is available only when the machine is equipped with the feeder (optional for
the imageRUNNER 2545/2535/2530/2525/2520).
NOTE
• The feeder error message prompt appears when originals are placed in the feeder.
• The default setting is ‘On’.
1 Press (Additional Functions) ➞ [Common Settings].
For help, see steps 1 and 2 in “Initial Function at Power ON,” on p. 3-2.
4 Press (Reset) to return to the top screen.
2 Press [ ] or [ ] until
[Error Display for Dirty Feeder]
appears ➞ press
[Error Display for Dirty Feeder].
3 Press [On] or [Off] to enable or
disable the feeder error message
prompt ➞ press [OK].
The selected mode is set.