User`s guide

Specifying Common Settings

3-17

Configuring the Machine’s Basic Settings

Standard Paper for the Stack Bypass

You can set the default paper size and type for the stack bypass. Use this setting if

you frequently load the same paper size and type in the stack bypass.

NOTE

• To feed paper from the stack bypass with the APS/ADS mode, the stack bypass must

be enabled for the desired job types. (See “Auto Paper Selection/Auto Drawer

Switching,” on p. 3-8.)

• For more information on the paper sizes/types available for the machine, see

“Available Paper Stock,” on p. 7-8.

• The default setting is ‘Off’.

Press (Additional Functions) ➞ [Common Settings].

For help, see steps 1 and 2 in “Initial Function at Power ON,” on p. 3-2.

Press [ ] or [ ] until

[Stack Bypass

Standard Settings] appears ➞

press [Stack Bypass

Standard Settings].

Press [On] ➞ [Store].

[Store] is activated only when [On] is

pressed.