User`s guide

Specifying Common Settings
3-16
Configuring the Machine’s Basic Settings
3
The selected mode is set.
IMPORTANT
• [Memory] is displayed only when the Use Media Print setting is set to ‘On’. (See
Chapter 7, “Other System Settings,” in the System Settings Guide.)
• [Receive] is displayed only when the Send function (optional for the imageRUNNER
2545/2535/2530/2525/2520) is activated.
• [Fax] is displayed only when both of the following conditions are met:
- The optional Super G3 Fax Board-AG1 is attached.
- The Send function is not activated.
4 Press (Reset) to return to the top screen.
3 Press [Copy], [Memory],
[Printer], [Receive](or [Fax]), or
[Other] to select the desired job
types for each output tray ➞
press [OK].
The selected job types are highlighted.
The screen shot on the left may differ from
the actual display depending on the
machine configuration.
[Copy]: Press to set the tray to handle copy jobs.
[Memory]: Press to set the tray to handle prints from the USB memory media
device.
[Printer]: Press to set the tray to handle prints via the printer driver.
[Receive](or [Fax]): Press to set the tray to handle received I-fax/fax documents.
[Other]: Press to set the tray to handle report prints.