User`s guide

Specifying Common Settings
3-12
Configuring the Machine’s Basic Settings
3
2 Press [ ] or [ ] until
[Register Paper Type] appears ➞
press [Register Paper Type].
3 Select the desired paper source.
The available paper sources can be
identified by the following icons:
: Drawer 1
: Drawer 2 (optional for the
imageRUNNER 2520i/2520)
: Drawer 3 (optional)
: Drawer 4 (optional)
4 Press [Plain ], [Recycled ],
[Color ], or [3-hole punch ] to
select the desired paper type ➞
press [OK].
IMPORTANT
Make sure that the selected paper type
is the same type of paper loaded in the
selected paper source.
The selected mode is set.
Repeat steps 3 and 4 to set the paper type
for the other drawers.