User`s guide

Specifying Common Settings
3-6
Configuring the Machine’s Basic Settings
3
Adjusting the Print Density
You can adjust the density for your prints. Use this setting if you notice a difference
in density between the image on the original and the print.
IMPORTANT
This setting does not apply to print jobs sent from a computer via a printer driver. To
adjust the density when printing from a computer, use the Density setting in the Print
Quality settings. (See Chapter 4, “Customizing Settings,” in the Printer Guide.)
NOTE
The default setting is ‘±0’, in the middle of the scale of ‘-4’ to ‘+4’.
3 Press (Reset) to return to the top screen.
1 Press (Additional Functions)
➞ [Common Settings] ➞
[Printer Density].
2 Press [Light] or [Dark] to set the
desired density on the scale ➞
press [OK].
The selected mode is set.