User`s guide

Using the Touch Panel Display

2-7

Basic Operations

NOTE

• If you make a mistake when entering a character, press [ ] or [ ] to position the

cursor on the right side of the incorrect character ➞ press [Backspace] to delete the

character ➞ enter the correct character.

• To delete all of the entered characters, press (Clear) on the control panel.

• The available entry modes and the maximum number of characters that you can enter

may vary depending on the type of entries you are making.

Entering Characters Using a USB Keyboard

Instead of using the on-screen keyboard, you can also use a standard USB

keyboard to enter characters.

IMPORTANT

• Make sure that the shape of the USB keyboard connector meets USB specifications.

Inserting a connector that does not meet USB specifications may damage the USB

port.

• Do not insert the connector of the USB keyboard into the USB port at an angle.

• Some USB keyboards may not operate correctly.

NOTE

The USB keyboard can be disconnected from the machine at any time. No special

operation is required to remove it.

❑ Press the key for the desired symbol.

When you have entered all

characters, press [OK].