User`s guide

Additional Functions Settings Table
7-6
Appendix
7
■ Timer Settings
■ Adjustment/Cleaning
Additional Functions Settings
Applicable
Page
Date & Time Settings
Enter <DD/MM YYYY hh:mm>.
Time Zone Settings:
GMT -12:00 to GMT +12:00; GMT 0:00
Daylight Saving Time Settings: On, Off
Start Date: March, Final Sunday
End Date: October, Final Sunday
p. 3-33
Auto Sleep Time*
On, Off (1 to 30 minutes in one minute
increments; 2 min)
p. 3-36
Auto Clear Time
0, 10 to 50 seconds in ten second
increments, 1 to 9 minutes in one minute
increments (0: Off); 2min
p. 3-38
Auto Shutdown Time
0, 1 to 8 hours in one hour increments (0:
Off); 4 hrs
p. 3-39
The default settings are indicated in bold.
* It is recommended to use the factory-installed settings for this item.
Additional Functions Settings
Applicable
Page
Transfer Roller Cleaning Press [Start] to start cleaning. p. 5-36
Drum Cleaning Press [Start] to start cleaning. p. 5-37
Fixing Unit Cleaning
Press [Start] to start cleaning.
Press [Cleaning Sheet Print] to start printing
the cleaning sheet.
p. 5-38
Feeder Cleaning* Press [Start] to start cleaning. p. 5-34
Special Mode M Standard, Low, High p. 6-49
Special Mode N Auto, Manual (Medium, High), Off p. 6-51
Special Mode O On, Off p. 6-53
Special Mode P Off, Medium, High p. 6-54
Special Mode G On, Off p. 6-55
Special Mode S On, Off p. 6-56
Rotate Collate Adjustment
Speed Priority 1, Speed Priority 2, Image
Priority
p. 6-57
Auto Adjustment for Dirty
Feeder*
On, Off p. 6-58
Special Mode E On, Off p. 6-59
Special Mode F Off, MODE1, MODE2, MODE3 p. 6-60
The default settings are indicated in bold.
* Indicates items whose availability may vary depending on the machine configuration.