User`s guide

Adjusting the Machine Settings
6-61
Troubleshooting
6
The selected mode is set.
4 Press (Reset) to return to the top screen.
2 Press [ ] or [ ] until
[Special Mode F] appears ➞
press [Special Mode F].
3 Press [Off], [MODE1], [MODE2],
or [MODE3] to select the desired
setting ➞ press [OK].
[Off]: Press to disable the mode.
[MODE1]: Press to prevent toner from smudging or bleeding on prints.
[MODE2]: Press to prevent toner from smudging or bleeding on prints more
effectively than [MODE1]. Use this mode if the problem persists
after [MODE1] was selected.
[MODE3]: Press to prevent toner from smudging or bleeding on prints more
effectively than [MODE1] or [MODE2]. Use this mode if the
problem persists after [MODE2] was selected.