User`s guide

Adjusting the Machine Settings

6-58

Troubleshooting

The selected mode is set.

Press (Reset) to return to the top screen.

Feeder Smudge Adjustment

If the feeder is dirty, dots or lines may appear on copies or prints. The Auto

Adjustment for Dirty Feeder mode prevents dirt and grime in the feeder from

appearing on your copies and prints.

NOTE

• This mode is available only when the machine is equipped with the feeder (optional for

the imageRUNNER 2545/2535/2530/2525/2520).

• Some dots or lines may continue to appear even if the mode is enabled. However,

copies and prints are significantly clearer than when the mode is disabled.

• The default setting is ‘On’.

Press (Additional Functions) ➞ [Adjustment/Cleaning].

For help, see steps 1 and 2 in “Improving Print Quality and Density,” on p. 6-49.

Press [Speed Priority 1],

[Speed Priority 2], or

[Image Priority] to select the

desired setting ➞ press [OK].

[Speed Priority 1]: Press to reduce the wait time. The image quality is degraded.

[Speed Priority 2]: Press to reduce the wait time to a lesser degree. The image

quality is moderate.

[Image Priority]: Press to give weight to the image quality over the speed. The wait

time may be long, but the image quality is high.