User`s guide

Adjusting the Machine Settings

6-57

Troubleshooting

Adjusting Output Speed in the Rotate + Collate Mode

Printing with the Rotate + Collate mode involves two different paper sources, and a

wait time is required to switch them. You can make this wait time shorter or longer

by selecting whether to give priority to the speed or image quality.

IMPORTANT

This setting is not available when the optional Inner Finisher-B1 is attached to the

machine.

NOTE

The default setting is ‘Speed Priority 1’.

Press (Additional Functions) ➞ [Adjustment/Cleaning].

For help, see steps 1 and 2 in “Improving Print Quality and Density,” on p. 6-49.

Press [ ] or [ ] until

[Rotate Collate Adjustment]

appears ➞ press

[Rotate Collate Adjustment].