User`s guide

Timer Settings
3-38
Configuring the Machine’s Basic Settings
3
Auto Clear Time
If the machine remains idle for a certain period of time, the display returns to the
default top screen or the top screen of the selected function. This period of time is
called the “Auto Clear Time.”
NOTE
The default setting is ‘2 min’.
1 Press (Additional Functions) ➞ [Timer Settings].
For help, see steps 1 and 2 in “Date & Time Settings,” on p. 3-33.
NOTE
To disable the Auto Clear Time setting, select <0> ➞ press [OK].
4 Press (Reset) to return to the top screen.
2 Press [Auto Clear Time].
3 Press [-] or [+] to enter the
desired time period ➞ press
[OK].
The Auto Clear Time can be set to zero
(Off), from 10 to 50 seconds (in ten second
increments), and from one to nine minutes
(in one minute increments).
The selected mode is set.