User`s guide

Configuring the Device Function Settings
2-54
2
Getting Started
Configuring the Device Functions
NOTE
For the imageRUNNER 105+ -M3, imageRUNNER 8070-M3, imageRUNNER 8070-S1,
imageRUNNER 85+ -M3, and imageRUNNER 9070-M3, you can enable the device
functions manually, according to your needs. To perform this operation, the
corresponding function settings must be enabled on the printer.
1 On the [Start] menu, point to [Settings] ➞ click [Printers].
NOTE
• If you are using Windows XP Professional/Server 2003, on the [Start] menu, click
[Printers and Faxes].
• If you are using Windows XP Home Edition, on the [Start] menu, click [Control
Panel] ➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
2 In the [Printers] folder, right-click the printer icon for your
printer ➞ click [Properties].
3 In the printer properties dialog box, click the [Configuration]
tab (Windows 98/Me) or [Device Settings] (Windows 2000/XP/
Server 2003) tab.
4 Click [Function].
The [Device Function Setting] dialog box opens.
5 Select the functions you want to use.
6 Click [OK].
The [Device Function Setting] dialog box closes.