User`s guide

Configuring the Device Function Settings
2-51
2
Getting Started
Configuring the Device Function Settings
If you cannot set up the printer configuration automatically (see "Setting Up the
Printer Configuration," on p. 2-46), you need to specify the device functions
manually.
Configuring the Controller Version
NOTE
For the Color imageRUNNER C2620, Color imageRUNNER C3200, Color
imageRUNNER C3200-C1, Color imageRUNNER C3220, imageRUNNER C3100,
imageRUNNER C3170, imageRUNNER C5800, imageRUNNER C6800, imageRUNNER
105, imageRUNNER 105-M1, imageRUNNER 105-M2, imageRUNNER 105+,
imageRUNNER 2230, imageRUNNER 2830, imageRUNNER 2870/2270,
imageRUNNER 2870G/2270G, imageRUNNER 3300/2800/2200, imageRUNNER 3300i,
imageRUNNER 3530, imageRUNNER 4570/3570, imageRUNNER 4570G/3570G,
imageRUNNER 5000i, imageRUNNER 7105/7095/7086, imageRUNNER 7105/7095/
7086-S1, imageRUNNER 7200, imageRUNNER 7200-M1, imageRUNNER 7200-M2,
imageRUNNER 8070, imageRUNNER 85, imageRUNNER 85-M1, imageRUNNER
85-M2, imageRUNNER 85+, imageRUNNER 8500, imageRUNNER 8500-M1,
imageRUNNER 8500-M2, and imageRUNNER 9070, the available functions vary
depending on the version of the controller for your printer. The controller version must be
configured in order to use the supported functions.
1 Print the Configuration Page.
❑ On the printer control panel, press (Additional Functions).
❑ Press [Report Settings] ➞ [Printer] under <Print List>.
❑ Press [PCL] ➞ [Configuration Page] ➞ [Yes].
NOTE
• The procedure of printing the Configuration Page differs depending on the model of
the printer you are using.
• The Controller Function ID and Function Version may not print out depending on
the model of the printer you are using.
2 Confirm the Controller Function ID and Function Version
printed on the Configuration Page.