User`s guide

Installing the Software
2-13
2
Getting Started
14 Click [Restart] or [Exit] to finish the installation.
The printer icon is displayed in the [Printers] folder. The driver is now installed.
Dynamic Installation
If you are using a printer connected to a network using TCP/IP protocol, you can
automatically search for its printer port. To install the printer driver by dynamic
installation, follow the procedure below.
IMPORTANT
You can search only for printers in the same subnet as your computer.
NOTE
If you are using a local printer or a printer connected to a network using a protocol other
than TCP/IP, see "Standard Installation," on p. 2-3.
1 Insert the Software CD-ROM into the CD-ROM drive ➞ wait for
the installation process to start.
If nothing happens, double-click the [My Computer] icon ➞ the CD-ROM drive
icon ➞ the [Minst.exe] icon to start the installation process.
If you cannot find the [Minst.exe] icon on your CD-ROM, follow the steps below.
1. Double-click the following folders: [PCL] ➞ [us_eng].
2. Double-click the [Setup.exe] icon to start the installation process ➞ proceed
to step 4.
NOTE
Depending on the software or the operating system you are using, a screen for
selecting the language to be used for the installer may be displayed before
installing.