User`s guide
Using Cover or Sheet Insertion Options
3-50
3
Basic Print Options
9
Specify the width to shift the image to be printed on the tab
part of the paper in [Shifting Width].
NOTE
You can change the unit used to specify the shift width (millimeters or inches).
10
Click [OK].
The [Inserting Sheet Settings] dialog box closes.
11
Click [OK].
Creating Tabs
NOTE
•
This option is available for the imagePRESS C1, Color imageRUNNER C2620, Color
imageRUNNER C2620-C1, Color imageRUNNER C2620-C2, Color imageRUNNER
C3200, Color imageRUNNER C3200-C1, Color imageRUNNER C3220, Color
imageRUNNER C3220-C1, Color imageRUNNER C3220-C2, Color imageRUNNER
C4080, Color imageRUNNER C4080-H1, Color imageRUNNER C4580, Color
imageRUNNER C4580-H1, Color imageRUNNER C5180, Color imageRUNNER
C5180-H1, imageRUNNER C5800, imageRUNNER C5800-D1, imageRUNNER C5870,
imageRUNNER C5870-G1, imageRUNNER C6800, imageRUNNER C6800-D1,
imageRUNNER C6870, imageRUNNER C6870-G1, imageRUNNER 105,
imageRUNNER 105-M1, imageRUNNER 105-M2, imageRUNNER 105+,
imageRUNNER 105+ -M3, imageRUNNER 5070, imageRUNNER 5070-S1,
imageRUNNER 5570-S1, imageRUNNER 6570/5570, imageRUNNER 6570/5570-M3,
imageRUNNER 6570-S1, imageRUNNER 7105/7095/7086, imageRUNNER 7105/7095/
7086-S1, imageRUNNER 7200, imageRUNNER 7200-M1, imageRUNNER 7200-M2,
imageRUNNER 8070, imageRUNNER 8070-M3, imageRUNNER 8070-S1,
imageRUNNER 85, imageRUNNER 85-M1, imageRUNNER 85-M2, imageRUNNER
85+, imageRUNNER 85+ -M3, imageRUNNER 8500, imageRUNNER 8500-M1,
imageRUNNER 8500-M2, imageRUNNER 9070, and imageRUNNER 9070-M3.
•
If [Group] or [Rotate] is selected for [Finishing] in the [Finishing] sheet, this option is not
available.
•
If [Store] is selected for [Output Method], this option may not be available depending on
the controller version of the printer.
•
Before creating tab paper, open the printer properties dialog box from the [Printers] folder
➞
click [Form to Tray Assignment] on the [Configuration] sheet (Windows 98/Me) or
[Device Settings] sheet (Windows 2000/XP/Server 2003)
➞
select [Tab Paper] from
[Paper Type] in the [Form to Tray Assignment] dialog box.