User`s guide

Specifying the Finishing Options
3-25
3
Basic Print Options
4 Click [Booklet].
The [Detailed Settings for Booklet] dialog box opens.
5 Specify the detailed settings ➞ click [OK].
6 Click [OK] in the [Finishing] sheet.
NOTE
You can use different paper for the cover page of the booklet. Select [Different for
Cover and Others] under [Paper Selection] in the [Paper Source] sheet ➞ specify
the paper source for the cover page and body pages of the document. (See
"Printing the Cover and Body Pages of a Booklet from Different Paper Sources," on
p. 3-37.)
Using Creep Correction for Booklet Printing
You can set Creep Correction when booklet printing. Creep Correction is used to
adjust the margins so that the printing position displacement of the outer and inner
pages due to the thickness of the bound sheets does not occur. This ensures that
the margins on all pages are in alignment after the page edges are cut by the
trimmer.
NOTE
This option is available for the imagePRESS C1, Color imageRUNNER C2880,
imageRUNNER C2880-J1, Color imageRUNNER C3380, imageRUNNER C3380-J1,
Color imageRUNNER C4080, Color imageRUNNER C4080-H1, Color imageRUNNER
C4580, Color imageRUNNER C4580-H1, Color imageRUNNER C5180, Color
imageRUNNER C5180-H1, imageRUNNER 7105/7095/7086, and imageRUNNER 7105/
7095/7086-S1.