Service manual

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
13-108
CHAPTER 13 TROUBLESHOOTING
b. #2 NUMERIC Param. (Numeric parameter settings)
No. Function Selection range
01 Deletion range of printed image when a long length image is
received 0 to 9999
04 Leading edge margin 0 to 9999
05 Trailing edge margin 1 0 to 9999
14 Trailing edge margin 2 0 to 9999
Table 13-526
[No. 1]
Sets the deleted image range when a long length image is received.
When you wish to keep the received image’s trailing edge even when receiving images
of a length that is over the effective record length, lower this parameter and reduce the
deletion range.
[No. 4]
Sets the effective recording length’s leading edge margin.
[No. 5]
Sets the effective recording length’s trailing edge margin.
[No. 14]
Sets the trailing edge margin. The length of the margin changes according to the paper
length.
A5 Setting value × (148.5/297)
A3 Setting value × (420/297)
A4R Setting value × (297/210)
The combined value of Bit 5 and Bit 14’s settings become the trailing edge margin.
c. #3 PRINT COUNT
Displays the number of pages printed.
d. #4 PRINT RESET
Resets the printer.
When a document whose length exceeds the effective recording length is received, if
the image length is within a range of 14 mm* of the effective recording length, this
range will be deleted and the image printed. When the image length is more the
14mm beyond the effective recording length, the received image will be reduced to a
maximum of 75%** and printed on one page. However, when the document exceeds
the effective recording length even after reduction, the image will not be reduced, but
will be divided and printed.
* Initial setting value
** When the user mode’s image reduction mode is set to automatic.
MEMO:
Download Free Service Manual at http://printer1.blogspot.com