Service manual

#1 SSSW-SW07: closed connection function setting

Table 13-509

The closed network connection function is a function for communication only with

specified faxes. This function is only available for specified faxes with machines that

have the closed network connection function.

[Bit 6]

Selects whether or not to use closed network connection reception function reception.

When you wish to receive a fax only from a specified machine, select “yes” and set the

same ID as the transmitting machine. The ID setting is set by the SW08 bit switch 8.

[Bit 7]

Selects whether or not to use closed network connection transmission function trans-

mission.

When you wish to send a fax only to a specified machine, select “yes” and set the same

ID as the reception machine.

The ID setting is set by the SW08 bit switch 8.

If the ID does not match that of the reception machine, an error code (#039) will be dis-

played.

1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 13 TROUBLESHOOTING

13-87

No.

Bit

No.

Function

0 Setting prohibited

Bit setting

1 Setting prohibited

2 Setting prohibited

3 Setting prohibited

4 Setting prohibited

5 Setting prohibited

6 Closed network connection reception Yes No

7 Closed network connection transmission Õ No

Download Free Service Manual at http://printer1.blogspot.com