Service manual

#1 SSSW-SW02: Network connection condition settings
Table 13-503
[Bit 0]
Selects whether or not to go into standby when the memory clear list is not output when
the machine is powered on, after an error occurs. After the screen data are cleared by
selecting “Prohibit”, turn on the power and clear the error. Then the machine will go into
standby after the memory clear report is output.
Reference:
Actions when “Prohibit” is selected
a) Error occurrence: will not receive at this time even if a transmission arrives.
b) After error clearing: memory clear report is output automatically. When an error
occurs during output, return to action a).
COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
13-80
SW
No.
Bit
No.
Function
02
0
Startup when there is faulty memory clear
report output
Bit setting
10
Restrict Do not restrict
1
2
Reserved
Reserved
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Reserved
Download Free Service Manual at http://printer1.blogspot.com