Service manual

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 12 MAINTENANCE AND INSPECTION
12-5
3. Handling
a. When setting the cartridge in the copier, or when blank areas occur in the copy
image because toner runs out during copying, hold the cartridge level, as shown in
figure 12-401, and shake it several times at about 90Þ in both directions. After the
toner inside the cartridge has been leveled evenly, set the cartridge in the copier. If
the cartridge is shaken in a manner other than that described above, there is the
danger that toner may leak from the developing assembly and cleaning assembly.
Figure 12-401
In order to completely prevent output image stains due to toner leakage, be sure to
make 3-5 test copies after setting the cartridge in the copier.
b. As shown in Figure 12-402, do not hold the cartridge vertically or upside down. Also,
do not wave it about.
Figure 12-402
Download Free Service Manual at http://printer1.blogspot.com