Service manual

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 EXTERNAL/AUXILIARY MECHANISM
9-19
B. Main Motor
1. Removing the printer unit
1) Pull out the cassette on the main
unit, and open the front cover.
2) Remove the cartridge.
3) Remove the 2 installation screws and
remove the lower left cartridge.
4) Remove the 5 installation screws [1],
and remove the delivery cover. Place
your hands as indicated in the dia-
gram, and lift it up a little to remove it.
Figure 9-505
Figure 9-506
Handles
[1]
Insert correctly
On the upper portion of the delivery
cover, inside the part marked ▲, there
is a tab for connecting. When the
cover is raised, the tab is released
from the catch.
When putting the cover on, while
ensuring that you have placed the tab
correctly in the ‘U’ guide, re-fit the
cover to the unit.
Caution:
Download Free Service Manual at http://printer1.blogspot.com