Service manual

COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP/FEEDING SYSTEM
7-26
3. To remove the pick-up unit
1) Remove the print unit from the main
unit (refer to 9-19).
2) Remove the main drive unit (refer to
9-22).
3) Remove the installation screw [1] and
tension spring [2], then remove the
front print unit pressure lever [3].
4) Remove the E-ring [4], then remove
the drive relay gear [5].
5) Remove the 4 installation screws [6]
and the multi-feeder pick-up solenoid
[7] connector. Then remove the multi-
feeder drive unit [8].
Figure 7-705
Figure 7-706
[1]
[3]
[2]
[6]
[4]
[5][6] [6]
[6][8]
[7]
Download Free Service Manual at http://printer1.blogspot.com