Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CONTENTS
T3
3.6 The copy is foggy
(entire face) .............................4-13T
3.7 The copy is foggy (vertical) ....4-14T
3.8 The copy has a black line
(vertical, fuzzy, thick) .............4-14T
3.9 The copy has a black line
(vertical, fine) .........................4-15T
3.10 The copy has a white spot
(vertical) .................................4-16T
3.11 The copy has a white line
(vertical) .................................4-16T
3.12 The copy has a white spot
(horizontal) .............................4-17T
3.13 The back of the copy is
soiled/ Soiled edge ..................4-18T
3.14 The copy has a fixing fault .....4-19T
3.15 The copy has a displaced
leading edge ............................4-20T
3.16 The copy has a displaced
leading edge (large margin) ....4-20T
3.17 The copy has a displaced
margin (no margin) .................4-20T
3.18 The copy is blurred .................4-21T
3.19 The copy is foggy
(horizontal) .............................4-22T
3.20 The copy has inadequate
sharpness ................................4-23T
3.21 The copy is completely
blank .......................................4-24T
3.22 The copy is completely
black .......................................4-26T
3.23 The copy has a block/white
dot after replacement of the
drum unit ................................4-27T
3.24 The copy has a black line
(stream reading) ......................4-27T
4 Troubleshooting Malfunctions ......4-28T
4.1 Power Supply System ............4-28T
4.1.1 The AC power is absent ...4-28T
4.1.2 The DC power is
absent ...............................4-29T
4.2 Printer Unit .............................4-30T
4.2.1 Pickup fails ......................4-30T
4.2.2 The lifter fails to move up
(pickup from the
cassette) ............................4-31T
4.2.3 The vertical path roller
fails to rotate .....................4-32T
4.2.4 The registration roller
fails to rotate .....................4-32T
4.2.5 Pickup from the multifeeder
tray fails (i.e., the pickup
roller fails to rotate) ..........4-33T
4.2.6 Pickup from the multifeeder
tray fails (i.e., the
multifeeder holding plate
fails to move up) ..............4-33T
4.2.7 The photosensitive drum
fails to rotate .....................4-34T
4.2.8 The pre-exposure lamp
fails to go ON ..................4-34T
4.3 Reader Unit ............................4-35T
4.3.1 The No. 1 mirror base
fails to move .....................4-35T
4.3.2 The scanning lamp fails
to go ON ..........................4-36T
4.4 Message Indication .................4-37T
4.4.1 The “Add Toner” message
fails to go OFF .................4-37T
4.4.2 The “Control Card Set” message
fails to go OFF (when no card
reader is installed) ............4-37T
4.4.3 The “Add Paper” message
fails to go OFF .................4-37T
4.4.4 The “Close the Front Cover”
massage fails to go OFF .. 4-38T
4.5 Paper Deck ............................ 4-39T
4.5.1 Pickup fails ..................... 4-39T
4.5.2 The deck lifter fails to
move up ...........................4-40T
5 Troubleshooting Feeding Faults .....4-41T
5.1 Paper Jams .............................4-41T
5.1.1 Pickup Assembly .............4-42T
5.1.2 Separation/Feeding
Assembly .........................4-43T
5.1.3 Fixing/Delivery Assembly,
Duplex Reversing
Assembly .........................4-43T