Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 2 OPERATIONS AND TIMING
2-77
J-3C
(1st original)
J-33
J-3D
(1st original)
J-34
J-3E
(1st original)
J-35
J-3F
(1st original)
J-36
J-4A
(1st original)
J-41
J-5A
(1st original)
J-52
J-5B
(1st original)
J-54
003C
0033
003D
0034
003E
0035
003F
0036
004A
0041
005A
0052
005B
0054
Pre-reversal sta-
tionary 1
Pre-reversal sta-
tionary 2
Pre-reversal sta-
tionary 3
Pre-reversal sta-
tionary 4
Reversal delay
Reversal pickup
delay
Reversal pickup
stationary
S1
S4
S2
S4
S2
S3
S1
S3
S1
S2
S2
At time of pre-reversal, the separation sensor
remains on although an original is assumed
to have been moved over a specific distance
(169 mm) after the reversal sensor has de-
tected its leading edge.
At time of pre-reversal, the pre-registration
roller paper sensor remains on although an
original is assumed to have been moved over
a specific length (about 120 mm) after the
trailing edge of an original has moved past
the separation sensor.
At time of pre-reversal, the post-registration
roller paper sensor remains on although an
original is assumed to have been moved over
a specific length (about 50 mm) after the
trailing edge of an original has moved past
the pre-registration roller paper sensor.
At time of pre-reversal, the reversal sensor
remains on although an original is assumed
to have been moved over a specific distance
(about 100 mm) after its trailing edge has
moved past the post-registration roller sen-
sor.
At time of reversal, the reversal sensor de-
tects an original after an original has been
made to arch and then moved over a specific
distance (original length x 1.5; approx.).
At time of reversal, the pre-registration roller
sensor does not detect an original although
an original is assumed to have been moved
over a specific distance (about 197 mm) after
it has been made to arch (S1 area).
At time of reversal, the pre-registration roller
paper sensor remains on although an original
is assumed to have been moved over a spe-
cific distance (original length x 1.5) after the
pre-registration roller paper sensor has de-
tected its leading edge.
T02-301-03
Jam code
DADF Copier
Jam type
Related
sensor
Conditions of detection