Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 2 OPERATIONS AND TIMING
2-71
2.9 Manual Feeder Pickup/Delivery
2.9.1 Operations
Manual feeder pickup/delivery is used only in fixed reading mode.
1) When an original is placed in the manual feeder, the manual feed set sensor (PI12) goes
on.
F02-209-01
2) When the Start key is pressed, the original is moved by the delivery roller so that its
leading edge is butted against the manual feed registration roller (to remove the skew).
F02-209-02
3) The original is moved by the delivery roller and the feeding belt, and is stopped when its
leading edge reaches the reversal sensor (S1).
F02-209-03
Manual feed set sensor (PI12)
Manual feed registration sensor (S9)
Reversal sensor (S1)