Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 2 OPERATIONS AND TIMING
2-41
2) The registration roller and the feeding belt are rotated to move the 1st original.
When the trailing edge of the 1st original moves past the point of contact [1] of the pick
roller, the 2nd original is picked up.
F02-206-02
3) The registration roller and the feeding belt are rotated to move the 1st original.
After its trailing edge moves past the pre-registration roller paper sensor (S2), the 1st
original is moved by the feeding belt over a specific length to determine its top position.
F02-206-03
4) The copier’s scanner starts copying operation.
F02-206-04
Registration roller
Feeding belt
2nd original
[1]
Pre-registration roller
paper sensor (S2)
Feeding belt