Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 2 OPERATIONS AND TIMING
2-30
2.4.3 Switching the Separation Pressure
The DADF’s separation assembly is equipped with a separation pressure switching
mechanism which enables switching between two settings (low or high).
The separation pressure may be switched by operating the separation pressure lever lo-
cated in front of the separation assembly. When the lever is operated, the position of the
separation belt moves up or down to change the amount of overlap in relation to the feeding
roller, thereby varying the separation pressure.
Memo
The separation pressure lever is set to “Low” at time of shipment from the
factory.
F02-204-08
High Low