Specifications

2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001

CHAPTER 2 OPERATIONS AND TIMING

2-23

c. Slide Guide Positioning Member

The rail of the slide guide is provided with notches to make sure that the slide guide stops

to suit a specific default original size. Some of these points representing differing paper

sizes, however, are close enough to allow the slide guide to be set at the wrong point.

To prevent wrong positioning of the slide guide, the DADF comes with two types of slide

guide positioning members; when fitted correctly, the positioning members will make sure

that the slide guide will stop at the correct point.

T02-203-07

F02-203-07

Color of slide guide positioning

member

Gray (for A/B-configuration)

Black (for Inch-configuration)

Stop position of slide guide

Side with 1 notch

A4R

LTRR

Side with 2 notches

A4R

LTRR

A4R

Slide guide

positioning member (gray)

Slide guide

positioning

members (black)

Relocate.

For Inch-configuration

For A/B-configuration

Slide guide positioning

member (gray)