Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
5-28
Steps to Take
1) Open the DADF, and make a single A4
copy of a solid black original.
2) Remove the screw, and detach the ADF
controller cover.
3) Set the DIP switch (SW1) on the ADF
controller PCB as indicated.
F05-102-02
F05-102-03
4) Place the output obtained in step 1) in
the original tray with the black side fac-
ing down.
Take care not to cover the origi-
nal sensor (S6) when placing
the output.
F05-102-04
ADF controller cover
Screw
Black side down
Original
sensor (S6)
Pre-last original
paper sensor (S8)
Original trailing
edge paper sensor
(S7)